Electronics Technology

ELN 131 Electronic Devices (3-3-0-4)
Prerequisites: ELC 112, ELC 131 or ELC 140
or ELC 131 and PHY 132
Corequisites: None
This course includes semiconductor-based devices such as diodes, bipolar transistors, FETs, thermistors, and related components. Emphasis is placed on analysis, selection, biasing, and applications in power supplies, small signal amplifiers, and switching and control circuits. Upon completion, students should be able to construct, analyze, verify, and troubleshoot discrete component circuits using appropriate techniques and test equipment.

ELN 132 Linear IC Applications (3-3-0-4)
Prerequisites: ELN 131 or BMT 113
Corequisites: None
This course introduces the characteristics and applications of linear integrated circuits. Topics include op-amp circuits, differential amplifiers, instrumentation amplifiers, waveform generators, active filters, PLLs, and IC voltage regulators. Upon completion, students should be able to construct, analyze, verify, and troubleshoot linear integrated circuits using appropriate techniques and test equipment. Integrated circuit fabrication is also covered.

ELN 133 Digital Electronics (3-3-0-4)
Prerequisites: None
Corequisites: None
This course covers combinational and sequential logic circuits. Topics include number systems, Boolean algebra, logic families, MSI and LSI circuits, AD/DA conversion, and other related topics. Upon completion, students should be able to construct, analyze, verify, and troubleshoot digital circuits using appropriate techniques and test equipment.

ELN 150 CAD for Electronics (1-3-0-2)
Prerequisites: CIS 110 or CIS 111 or ELC 127
or CSC 129
Corequisites: None
This course introduces computer-aided drafting (CAD) with an emphasis on applications in the electronics field. Topics include electronics industry standards (symbols, schematic diagrams, layouts); drawing electronic circuit diagrams; and specialized electronic drafting practices and components such as resistors, capacitors, and ICs. Upon completion, students should be able to prepare electronic drawings with CAD software.

ELN 154 Intro to Data Comm (2-3-0-3)
Prerequisites: ELN 133
Corequisites: None
This course introduces the principal elements and theory (analog and digital techniques) of data communication systems and how they are integrated as a complete network. Topics include an overview of data communication, OSI model, transmission modes, serial and parallel interfaces, applications of ICs, protocols, network configurations, modems, and related applications. Upon completion, students should be able to demonstrate knowledge of the concepts associated with data communication systems and high speed networks.

ELN 229 Industrial Electronics (2-4-0-4)
Prerequisites: ELC 112, ELC 131 or ELC 140
Corequisites: None
This course covers semiconductor devices used in industrial applications. Topics include the basic theory, application, and operating characteristics of semiconductor devices (filters, rectifiers, FET, SCR, Diac, Triac, Op-amps, etc). Upon completion, students should be able to install and/or troubleshoot these devices for proper operation in an industrial electronic circuit. Oral and written communications skills will be emphasized.

ELN 232 Intro to Microprocessors (3-3-0-4)
Prerequisites: ELN 133
Corequisites: None
This course introduces microprocessor architecture and microcomputer systems including memory and input/output interfacing. Topics include assembly language programming, bus architecture, bus cycle types, I/O systems, memory systems, interrupts, and other related topics. Upon completion, students should be able to interpret, analyze, verify, and troubleshoot fundamental microprocessor circuits and programs using appropriate techniques and test equipment. Oral and written communications skills will be emphasized.

ELN 233 Microprocessor Systems (3-3-0-4)
Prerequisites: ELN 232
Corequisites: None
This course covers the application and design of microprocessor control systems. Topics include control and interfacing of systems using AD/DA, serial/parallel I/O, communication protocols, and other related applications. Upon completion, students should be able to design, construct, program, verify, analyze, and troubleshoot fundamental microprocessor interface and control circuits using related equipment.

ELN 234 Communication Systems (3-3-0-4)
Prerequisites: ELN 132 or ELN 140
Corequisites: None
This course introduces the fundamentals of electronic communication systems. Topics include the frequency spectrum, electrical noise, modulation techniques, characteristics of transmitters and receivers, and digital communications. Upon completion, students should be able to interpret analog and digital communication circuit diagrams, analyze transmitter and receiver circuits, and use appropriate communication test equipment. Oral and written communications skills will be emphasized.

ELN 235 Data Communication Systems (3-3-0-4)
Prerequisites: ELN 133
Corequisites: None
This course covers data communication systems and the transmission of digital information from source to destination. Topics include data transmission systems, serial interfaces and modems, protocols, networks, and other related topics. Upon completion, students should be able to demonstrate knowledge of the concepts associated with data communication systems. Oral and written communications skills will be emphasized.

ELN 237 Local Area Networks (2-3-0-3)
Prerequisites: CIS 110 or CIS 111 or CET 111 or ELC 127
Corequisites: None
This course introduces the fundamentals of local area networks and their operation in business and computer environments. Topics include the characteristics of network topologies, system hardware (repeaters, bridges, routers, gateways), system configuration, and installation and administration of the LAN. Upon completion, students should be able to install, maintain, and manage a local area network.

ELN 238 Advanced LANs (2-3-0-3)
Prerequisites: ELN 237
Corequisites: None
This course covers advanced concepts, tools, and techniques associated with servers, workstations, and overall local area network performance. Topics include network security and configuration, system performance and optimization, communication protocols and packet formats, troubleshooting techniques, multi-platform integration, and other related topics. Upon completion, students should be able to use advanced techniques to install, manage, and troubleshoot networks and optimize server and workstation performance.

ELN 240 Microprocessor Fund (3-3-0-4)
Prerequisites: ELN 141
Corequisites: None
This course introduces microprocessor architecture and microcomputer systems. Topics include use of technical documentation, bus architecture, I/O and memory systems, and other related topics. Upon completion, students should be able to analyze and troubleshoot basic microprocessor circuits.

ELN 244 Computer Repair (3-6-0-5)
Prerequisites: ELN 133 or  ELN 141
Corequisites: None
This course covers the assembly, upgrading, and repair of microcomputers. Topics include logic test equipment, computer motherboards, storage devices, I/O devices, power supplies, and other peripherals. Upon completion, students should be able to assemble, upgrade, maintain, troubleshoot, and repair microcomputers.

ELN 246 Cert Elect Tech Prep (3-0-0-3)
Prerequisites: None
Corequisites: None
This course covers electronic principles, theories, and concepts. Emphasis is placed on those items covered in the Certified Electronic Technician examination. Upon completion, students should be able to demonstrate competence in electronics and be prepared for the Certified Electronic Technician examination.

ELN 260 Prog Logic Controllers (3-3-0-4)
Prerequisites: None
Corequisites: None
This course provides a detailed study of PLC applications, with a focus on design of industrial control circuits using the PLC. Topics include PLC components, memory organization, math instructions, programming documentation, input/output devices, and applying PLCs in the design of industrial control systems. Upon completion, students should be able to design and program a PLC system to perform a wide variety of industrial control functions.